We are Leading Manufacturers and Suppliers of Rubber Rumble Strips in from Hyderabad to all over India, The Rubber Rumble Strips are place in the middle of roads to improve traffic safety. It prevents drivers from crossing road centre line without noticing it. We are specialized in manufacturing of Rubber Rumble Strips, which are made from Recycled Rubber. These Rubber Rumble Strips are highly resistant to various impacts and harsh weather conditions. Rumble strips, also known as sleeper lines, alert strips, audible lines, sleepy bumps, wake up calls, growlers, drift lines, and drunk bumps.
1.INTRODUCTION TO RUBBER RUMBLE STRIPS: A rumble strip is applied along the direction of travel following an edge line or centre line, to alert drivers when they drift from their lane. Rumble strips may also be installed in a series across the direction of travel, to warn drivers of a stop or slow down ahead, or of an approaching danger spot. In favourable circumstances, rumble strips are effective (and cost-effective) at reducing accidents due to inattention. The effectiveness of shoulder rumble strips is largely dependent on a wide and stable road shoulder for a recovery, but there are several other less obvious factors to consider during design.Rumble strips are divided into transverse rumble strips, shoulder rumble strips, and centre line rumble strips, depending on how they are used. Transverse rumble strips are placed in the travel lanes where most if not all vehicles will cross them. They are used to alert the driver of an upcoming intersection, toll booth or similar hazard. They may cross the entire road from shoulder to shoulder, or they may only be in the wheel paths.Shoulder and centre line rumble strips are used to reduce lane departure crashes. Centre line rumble strips are used on undivided highways to reduce cross-over incidents and resultant head-on collisions. Shoulder rumble strips are used primarily to reduce run-off-road collisions. They alert distracted or drowsy drivers that they are leaving the roadway or crossing the centre line of the road. In this application, they are narrower and outside of the wheel paths. Rumble strips are grooves or rows of indents in the pavement designed to alert inattentive drivers through noise and vibration and reduce the number of accidents. These rubber rumble strips have multiple applications, and can be used on roadways to separate lanes, and reduce traffic speeds. Distances can be varied between the strips to obtain the required effect. Other applications include mounting on walls for protective strips and can also be used for spill bonding.
2.DESCRIPTION / SPECIFICATIONS OF RUBBER RUMBLE STRIPS:
1.Material: Recycled Rubber
2.Length: 500 mm
3.Width: 125 mm
4.Height: 25 mm.
5.Weight of Rubber Rumble Strips : 3.2 Kgs.
6. 1 Meter = 2 Pieces - One Black & One Yellow.
7. 4 Screwing Points on One Piece, total 8 Screwing Points in One Meter.
8. Made in India.
3.FEATURES OF RUBBER RUMBLER STRIPS:
•Durable and versatile low profile recycled rubber
•Used as a speed moderator or lane divider on roadways.
•Can be used as a wall mounted bump protector.
•Can be installed with appropriate masonry fixings or glued using a suitable adhesive
•Black & Yellow color combination for greater visibility.
•Rubber as a base material helps it in making better grip on the road.
•Moisture & temperature resistant.
•Instant installation with the application of epoxy and bolts.
•Modular design provides easy installation.
•No need to paint again & again due to pre-color, hence painting cost is NIL.
•Reflectors & Glass Elements provides better night vision.
•Provides much better comfort for passengers in the vehicles. The design on the speed Humps makes easy drainage of rain water.
•Any length of speed humps is possible as the design/sections are modular.
•Encourages Safer Driving Speeds
•Highly Flexible Rubber Construction
•Suitable For Heavy Traffic
•Skid Resistant Surface.
4.APPLICATIONS OF RUBBER RUMBLER STRIPS:
•Entry Point of Bridges
5.HOW RUBBER RUMBLE STRIPS WORKS:
5.1.What is a Rubber Rumble Strips? The Rumble Strips are place in the middle of roads to improve traffic safety. It prevents drivers from crossing road centre line without noticing it.
5.2.Description of Rubber Rumble Strip?
There are Two Pieces in 1 Meter of Rumble Strips. One is in Yellow Colour & the other is in Black Colour. There are 4 Screwing Points on one Piece of Speed Breaker to Install the Rumble Strips on Roads. On one Meter of Rumble Strips we can find 8 Screwing Points for Installation. There are zigzag lines on Speed Breaker which helps to drain out the water on Roads when rain falls and does not face the colour in any weather conditions.Rubber Rumble Strips it is very compact and has high resistance capacity to withstand severe impacts. The pre-coloured UV stabilized material (Black & Yellow) provides it permanent colour. We hold expertise in offering our valuable clients a wide range of Rumble Strips. Precisely made from Recycled rubber sourced from reliable vendors in compliance with the set industry standards, these Rumble Strips are extensively demanded in the global market.
5.3.Why we use Rubber Rumble Strips on Roads?
The Rumble Strips are place in the middle of roads to improve traffic safety. It prevents drivers from crossing road centre line without noticing it. These Strips are suitable to be fixed in a series on the road for controlling the speed of vehicle. Offered Rumble Strips are accurately designed at our sound production unit by making use of premium grade materials in accordance with the industry pre-set guidelines and norms. A team of our quality analysts carefully test these Rubber Rumble Strip on durability and sturdiness parameters.This Rumble Strips conforms to government standards and industry regulations. National Highways Authority of India is responsible for highways.
5.4Where are they used on Roads?
Rumble Strips are installed at where there is a consistent record of accidents are happened to the speed of vehicles. These are installed at Toll Plazas, entry point of bridges and narrow roads to control the vehicle speed.These are also placed at urban areas for minor roads like school zones, hospitals, residential areas, bus Stations and railway stations. So that children’s and Senior citizens are easily crossed the road. The Rumble Strips not recommended for high speed roads and highways outside of urban areas.The vehicles drivers should be warned of the presence of speed breakers are installed on the road by posting a suitable sign boards. And Rumble Strips are mostly used in yellow and block colour combination with reflectors.
5.5.How to Install Rubber Rumble Strips on the Roads?
•Before installing your Rumble Strips, make sure that the road surface that you will be fitting them onto is clean, dry, and undamaged.
•If any damage to the surface should be repaired before the Rumble Strips are installed to provide a reasonably flat and consistent surface.
•To Position Rumble Strips in desired location. Mark where to fix bolt holes sit. Remove speed bump.
•Drill each marking through pavement to create space for steel spikes.
•Mix enough epoxy for one installation. Fill the holes to 2” from top with adhesive.
•Apply adhesive to bottom of Rumble Strips & Set in correct place & Install washers with hammer.
6.Life Span & Warranty of Rubber Rumble Strips:
•Our Product can sustain Up to 1 Year if there is no Usage Defects.
•One Year Warranty against any Manufacturing Defect but not Usage Defect / Natural Calamity.
7.CONCLUSION:These are the Complete Specifications & Uses of of Rubber Rumble Strips these are very helpful in Highways, Parking areas, in construction sites etc., to control the accidents. This is why it is called as a world’s product.